Program your Genie remote control

Learn how to program your Genie remote to control an HDTV, a DIRECTV Ready TV, and audio devices such as a soundbar.

Select your option for personalized help.

Remote control

remote

slctrgrp_universalremote

KM1011991-slctrgrp_universalremote
ArticleDETAILED STEPS

Program DIRECTV remote for HDTV and other devices

Below is the most common way to program a Genie remote. If these steps don’t work for you, follow the next set of steps to program a remote manually.
  1. Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini. 
  2. Press and hold the MUTE and ENTER buttons. Stop when the green light at the top of the remote blinks twice.
  3. When the TV screen displays Applying IR/RF setup, you are in RF mode and ready to program the remote.
  4. Power on the device you want your remote to control.
  5. Press MENU on your remote.
  6. Select Settings > Remote Control > Program Remote.
  7. Select the device you wish to control with the remote.
  8. Follow the on-screen prompts to complete programming.

Heads up: The DIRECTV remote powers on your TV and controls the volume while watching DIRECTV. To adjust TV settings or access third-party apps, use the remote control that came with your TV.

Program remote manually for your HDTV or audio device

  1. Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini. 
  2. Press and hold the MUTE and SELECT buttons while continuing to point the remote at a Genie device. Stop when the green light at the top of the remote blinks twice.
  3. Use the buttons on your Genie remote to enter code 961.
  4. Press the channel up button once.
  5. Press Enter.
  6. Select OK when the TV screen displays Your Remote is now setup for RF. 
  7. Power on the device you want your remote to control.
  8. Press MENU on your remote.
  9. Select Settings > Remote Control > Program Remote.
  10. Select the device you wish to control with the remote.
  11. Follow the on-screen prompts to complete programming. The directions vary for different devices.

Program remote for a DIRECTV Ready TV

  1. Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini. 
  2. Press and hold the MUTE and ENTER buttons while continuing to point the remote at a Genie device. Stop when the green light at the top of the remote blinks twice.
  3. When the TV screen displays Applying IR/RF setup, you are in RF mode and ready to program the remote.
  4. Power on your DIRECTV Ready TV.
  5. On your remote, press and hold the MUTE and SELECT buttons. Stop when the green light at the top blinks twice. 
  6. Enter the appropriate manufacturer's code. If you don’t see your TV or device listed, use the code lookup tool to find the 5-digit code.
    • For Samsung DIRECTV Ready TVs, enter 54000. 
    • For Sony DIRECTV Ready TVs, enter 54001. 
    • For Toshiba DIRECTV Ready TVs, enter 54002
  7. The Genie remote is now set up for your DIRECTV Ready TV.

Related Articles

Order a new remote control

Looking for something else?

  1. Support
  2. Program your Genie remote control