Orders, apps & equipment

How to fix your DIRECTV remote

<div id="selectorOptionsLabel">Choose the remote you have at your home:</div>
<div id="selectorOptions">
<div id="primaryTile"><span id="tileImage">https://www.directv.com/dtvassets/support/genie_remote_DTV.png</span>
<div id="tileLabel">Genie (DIRECTV)</div>
<div id="tileContent">
<div id="tileTitle">Fix your Genie remote control</div>
<div id="tileDescription">Learn how to fix volume, channel changing, and other remote issues.</div>
<div id="tileGoBackLink">Go back and choose again</div>
<div id="tileGoBackText">Not your remote?</div>
<div id="firststepcontent">
<p><br>The Genie remote uses light to send the signal to the receiver. If anything is blocking the receiver, this can affect the functionality of the remote. We recommend having the receiver placed in an area that is free and clear of obstructions.</p>
<h3><br>Batteries and Receiver Input Setting</h3>
<p>To test battery strength, press and hold any button on your remote. If you see:</p>
<ul><li>A solid green light - the batteries are strong.</li><li>A fast-blinking green light - the batteries are okay but may need to be replaced soon.</li><li>A slow, blinking green light or no light - your remote needs new batteries. Remove the battery cover and insert two new AA batteries.</li></ul>
<p><br>Check that the remote is set to control your DIRECTV receiver.</p>
<ol><li>Press and hold the ENTER button for three seconds.</li><li>A Source menu appears to change your TV’s input.</li><li>Select the DIRECTV receiver’s input source. For example, HDMI 1: Satellite Receiver, may be the name of the input. Try different inputs to find the one set up for your TV.</li></ol>
<h3><br>Pair Genie remote with your receiver</h3>
<p>Is nothing happening when you press GUIDE? Make sure your remote is paired with your receiver.</p>
<ol><li>Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.</li><li>Press and hold MUTE and ENTER at the same time on your remote.</li><li>The screen displays Applying IR/RF Setup. The remote is synced.</li></ol>
<p>If that didn’t fix the issue, continue to the next section.</p>
<br><h3>Reset receiver and Genie remote control</h3>
<p>If the buttons on your remote are not responding, try resetting the receiver and remote control.<br><br><strong>Reset a receiver</strong></p>
<ol><li>On most DIRECTV receivers, there is a red button on the side of the receiver or inside the access card door.</li><li>Press and hold the red button until the receiver restarts.</li></ol>
<p>Note: Are you unable to locate the red button? Unplug the receiver&#39;s power cord from the electrical outlet. Wait 15 seconds before plugging it back in.</p>
<h3><br>Reset a Genie remote control</h3>
<p>If restarting your receiver didn’t help, try resetting the remote control:</p>
<ol><li>Press MENU on the remote.</li><li>Arrow down to Settings and press SELECT.</li><li>Go to Remote Control and press SELECT.</li><li>Select Pair/Program Remote. Depending on your setup, this may be automatic, or you may have to enter codes into your remote. Use the code lookup tool to find the 5-digit code.</li></ol>
<p><br>If that didn&#39;t help, try resetting the remote to its default factory settings:</p>
<ol><li>Press and hold MUTE and SELECT together until the light flashes three times.</li><li>Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.</li></ol>
<p> </p>
<h3>Troubleshooting</h3>
<p><strong>Self-care Troubleshooting Wizard</strong></p>
<p>Follow the self-service steps below, as appropriate, to correct remote control issues:</p>
<ol><li>From the Home screen, navigate to and select <strong>Settings</strong>.</li><li>Under the Device Management header, select <strong>Remote Control</strong>.</li><li>The Remote Control Setup screen displays with options to pair/program, troubleshoot, or switch to RF/IR mode; <strong>select Troubleshoot Remote</strong>.</li><li>Select the appropriate option to try to repair your remote or you can select Exit to leave troubleshooting:</li></ol>
<p><strong>Low Battery</strong></p>
<ol><li>From the Troubleshoot Remote page, select <strong>Battery: Low</strong>.</li><li>Follow the instructions to change the batteries.</li><li>Choose <strong>Recheck Battery</strong> or <strong>Cancel</strong> to exit.</li></ol>
<p><strong>Reset and Reprogram</strong></p>
<ol><li>From the Troubleshoot Remote page, select <strong>Reset and Reprogram</strong>.
<ul><li>A system test runs to detect low battery issues and remote control settings.</li></ul>
</li><li>Follow the steps provided to take the appropriate action.</li><li>Once the appropriate steps are completed, you are returned to the Troubleshoot Remote page to continue troubleshooting or select <strong>Exit</strong>.</li><li>If the Reprogramming Successful screen displays, you can use the Genie remote with your TV; select <strong>OK</strong>.
<ul><li>If the issue is unresolved, make a different selection to continue troubleshooting.</li></ul>
</li></ol>
<p><strong>Get Additional Help</strong></p>
<ol><li>If you&#39;re still experiencing issues with your remote, you can scan the QR code displayed or access DIRECTV&#39;s website for more options.</li><li>Select <strong>OK</strong> to return to the Troubleshoot Remote page or select <strong>Exit</strong>.</li></ol>
<p> </p>
<h3><strong></strong></h3>
<h3>Additional remote-control help</h3>
<ul><li><a href="https://www.directv.com/support/satellite/article/000069458" target="_blank">Order a new or replacement remote control</a>.</li><li>If you can’t adjust the TV’s volume, try programming your Genie remote control.</li></ul>
</div>
</div>
</div>
<div id="primaryTile"><span id="tileImage">https://www.directv.com/dtvassets/support/universal_remote.png</span>
<div id="tileLabel">Universal</div>
<div id="tileContent">
<div id="tileTitle">Fix your Universal remote control</div>
<div id="tileDescription">Learn how to fix your Universal remote, receiver, and settings.</div>
<div id="tileGoBackLink">Go back and choose again</div>
<div id="tileGoBackText">Not your remote?</div>
<div id="firststepcontent">
<h3>Remote buttons, batteries, and mode</h3>
<p>Run your fingers across each button to make sure none are stuck in the pressed-down position.</p>
<h3><br>Check batteries</h3>
<p>To test your batteries, press and hold any button on your remote. If you see:</p>
<ul><li>
<p>A solid green light - the batteries are strong.</p>
</li><li>A fast-blinking green light - the batteries are okay but may need to be replaced soon.</li><li>A slow, blinking green light or no light - your remote needs new batteries. Remove the battery cover and insert two new AA batteries.</li></ul>
<h3><br>Change Mode on the remote</h3>
<p>If your remote is not responding, changing channels, or adjusting the volume, make sure you have direct line of sight to the receiver. Next, make sure your remote is set to control your DIRECTV receiver:</p>
<ul><li>
<p>At the top of the remote, slide the mode switch all the way to the left to the DIRECTV symbol.</p>
</li><li>If your remote controls your receiver but doesn’t work on other devices, change the input mode by sliding the mode switch to the input symbol (for example TV, AV1, or AV2).</li></ul>
<p>If <span style="background-color: #ffffff;">none of these options work, you may need to </span><a href="https://www.directv.com/support/article/000080718" target="_blank"><span style="background-color: #ffffff;">program your remote</span></a><span style="background-color: #ffffff;">.</span></p>
<h3><strong></strong></h3>
<h3>Pair your Universal remote using HD receiver</h3>
<ol><li>Go to your HD receiver and press the Menu button on the front panel.</li><li>Select <strong>Settings &gt; Remote control &gt; IR/RF Setup</strong>.</li><li>If currently in RF mode, change to IR.</li><li>Select <strong>Continue</strong>.</li></ol>
<p>The remote uses light to send the signal to the receiver. If anything blocks the receiver, it can affect how well the remote responds.</p>
<ul><li>Clean the remote control&#39;s emitter and the receiver’s sensor with a soft, lint-free cloth. Wipe the top of the remote and use the same type of cloth to wipe the front panel of your receiver.</li><li>Make sure nothing blocks the path between the receiver’s sensor or the remote’s emitter.</li><li>Turn the brightness down on the TV.</li></ul>
<h3>Reset your receiver</h3>
<ul><li>Most DIRECTV receivers have a red button inside the access card door or on the side of the receiver. Press the red button to restart it.</li><li>If you can&#39;t locate the red button, unplug the receiver&#39;s power cord from the electrical outlet. Wait 15 seconds, then plug it back in.</li></ul>
<p>If you’re still having trouble, <a href="https://www.directv.com/support/article/000069458" target="_blank">order a Universal remote control</a>.</p>
</div>
</div>
</div>
<div id="primaryTile"><span id="tileImage">https://www.directv.com/dtvassets/support/Gemini.png</span>
<div id="tileLabel">Gemini</div>
<div id="tileContent">
<div id="tileTitle">Fix your DIRECTV remote control</div>
<div id="tileDescription">Learn how to fix your Gemini remote control.</div>
<div id="tileGoBackLink">Go back and choose again</div>
<div id="tileGoBackText">Not your remote?</div>
<div>Set up your remote control based on the service you use:</div>
<div> </div>
<div id="secondaryRadio1">
<h3 id="secondaryRadioName1"><strong>Satellite dish</strong></h3>
<div id="secondaryRadioContent1">
<p>Many common problems can be fixed by refreshing the connection between your remote and Gemini device. <strong>To refresh the connection, press and hold the home button on your remote.</strong></p>
<p>If this doesn’t work, <strong>unpair your remote</strong> from your Gemini device:</p>
<ol><li>Press and hold the <strong>DASH (–)</strong> and <strong>APPS</strong> buttons until you see the LED lights on the remote blink blue twice.</li><li>Restart your Gemini device by pressing and releasing the red button on the side of the device. You can also unplug your device and then plug it back in.</li></ol>
<p>When your Gemini device is back on, <strong>pair the remote again</strong>:</p>
<ol><li>Point the remote at your Gemini device.</li><li>Press and hold <strong>FAST FORWARD</strong> and <strong>REWIND</strong> at the same time for 2-3 seconds. When paired, you’ll get an on-screen message that your remote is ready to use.</li></ol>
<p><img alt="RW-FF.jpg" src="https://www.directv.com/content/dam/images/support/sf-images/RW-FF.jpg"></img></p>
<p><strong>Battery check</strong><br>Take your batteries out for a couple of seconds, then put them back in to see if that helps. Or swap them out for a fresh set of batteries.</p>
<p><strong>Heads up!</strong></p>
<ul><li>Pairing can become an issue if batteries are less than 50 percent effective. Bluetooth won’t work all the time.</li><li>The dash button may give the exact battery percentage. Alternatively, you can go to <strong>Menu &gt; settings &gt; this device setting, scroll down active remote, and select give battery percentage</strong>.</li><li>Remote slowly switches to IR mode when the battery is under 25 percent.</li><li>Red light indicates that you need new batteries around 10-15 percent. Exact percentage number may vary based on battery type, voltage, and amp.</li></ul>
</div>
</div>
<div id="secondaryRadio2">
<h3><strong></strong></h3>
<h3 id="secondaryRadioName2"><strong>Internet connection (No satellite) (Gemini and Gemini Air remote)</strong></h3>
<div id="secondaryRadioContent2"><strong>Battery check</strong><br>Take your batteries out for a couple of seconds, then put them back in to see if that helps. You can also try inserting new batteries.<br><br><strong>Remote pairing</strong><br>Heads up! Do you have more than one remote? Each remote control can only be paired to one Gemini (DIRECTV) device at a time and cannot be interchanged without reprogramming. Check that the remote was not accidentally switched.<br><br>Refreshing the connection between your remote and Gemini (DIRECTV) device can fix many common problems. Here’s how:<br><br>First, unpair your remote from the device:
<ol><li>Press and hold <strong>DASH </strong>(–) and <strong>APPS </strong>or <strong>Diamond </strong>buttons until you see the LED lights on the remote blink blue twice.</li><li>Restart your Gemini (DIRECTV) device by pressing and releasing the red button on the side of the device. You can also unplug your device and then plug it back in.</li></ol>
<p>When your Gemini (DIRECTV) device is back on, pair the remote again:</p>
<ol><li>Point the remote at your Gemini (DIRECTV) device.</li><li>Press and hold <strong>FAST FORWARD</strong> and <strong>REWIND</strong> at the same time for 2-3 seconds. When they pair, you’ll get an onscreen message that your remote is ready to use.</li></ol>
<p><img alt="RW-FF.jpg" src="https://www.directv.com/content/dam/images/support/sf-images/RW-FF.jpg"></img><br><br><strong>Control sound bars and TVs</strong></p>
<ol><li>Program your DIRECTV remote to control them. Here&#39;s how:</li><li>Open DIRECTV on your TV device.</li><li>Choose Settings and then System.</li><li>Select Remote &amp; Devices, then Program Your Remote.</li><li>Choose the TV manufacturer or sound bar you want to add.</li><li>Follow the prompts to finish up.</li></ol>
</div>
</div>
</div>
</div>
</div>

Helpful tips for changing channels, adjusting volume, and troubleshooting your DIRECTV remote.

<p>Helpful tips for changing channels, adjusting volume, and troubleshooting your DIRECTV remote.</p>

Error codes & messages

See if networks are no longer in your lineup

Use DIRECTV 72 Hour Rewind to watch previously aired programming

Move your DIRECTV service FAQ

Watch NFL football games on DIRECTV

Stream your network favorites

Get help with error code 745, 746, or 761

DIRECTV error code: 752

Get help with receiver restart errors

Energy-use info for TV receiver equipment

Use the DIRECTV Tablet app

Manage DIRECTV billing and payments

Get help with location service errors

Watch college football on DIRECTV

Get and troubleshoot the DIRECTV App on LG Smart TVs

Learn about DIRECTV's Interface experience

DIRECTV On Demand and Pay Per View (PPV)

Streaming NFL games FAQ

Fix DIRECTV network connection error messages

Fix location service errors on DIRECTV device for DIRECTV via Internet

Adding and removing apps from your DIRECTV Gemini device

DIRECTV Descriptive Video Service

Explore your Gemini Voice Remote

Watch in multi-view with DIRECTV Mix channels

Get help with DIRECTV error codes 721, 722

Learn how to cancel a movie or TV episode you ordered from your DIRECTV device

Get NHL CENTER ICE on DIRECTV

Tracking the status of your DIRECTV reward

Change your DIRECTV Signature Package

Watch local channels on DIRECTV

Order a new remote control

DIRECTV error code: 724, 725 or 726

Sign up for DIRECTV Streaming

Get and troubleshoot the DIRECTV App on VIZIO Smart TVs

Learn about DIRECTV fees

Explore subscription movie packages and favorites

Use Picture-in-Picture (PiP) with Genie DVR

Sporting event blackouts

Change DIRECTV STREAM notification settings

Get help with DIRECTV STREAM upgrade error messages

Get help with DIRECTV upgrade error messages

Fix DIRECTV streaming limit errors

Check your DIRECTV reward status

Use VoiceView or TalkBack on DIRECTV

Watch local and regional sports with DIRECTV

Get help streaming DIRECTV on your computer

Read the DIRECTV Terms & Conditions

All about DIRECTV Genre Packs

DIRECTV Gemini Air factory reset

Troubleshoot directv.com streaming issues

DIRECTV error code: 711

Return or recycle your DIRECTV equipment

View your charges and payment history

How to fix a "Low Storage" error message on DIRECTV Gemini Devices

How to program your DIRECTV remote control

Record DIRECTV content

How to access discovery+

Check your DIRECTV STREAM user ID

How to access discovery+ on DIRECTV App

Manage pop-up blocker & anti-virus settings

Manage DIRECTV pop-up blocker & anti-virus settings

Get help with a blue, black, green, or gray TV screen

Get help with DIRECTV error code 782

Get help with DIRECTV error code 771

Enroll in paperless billing

Update your profile info

Get your account balance and due date

Learn about managing your DIRECTV account online

Manage contact info in your DIRECTV account profile

DIRECTV error code: 744

Use your mobile device as a remote control

DIRECTV error code: 763

DIRECTV error code: 927

DIRECTV error code: 727

DIRECTV error code: 773

DIRECTV error code: 772

DIRECTV error code: 774

DIRECTV error code: 764

DIRECTV error code: 920

Fix DIRECTV error code 792

DIRECTV STREAM error codes FAQ

DIRECTV error code: Your receiver is too hot

DIRECTV error code: 928

Why is my bill higher than expected?

Using TalkBack or VoiceView

Add or remove premium channels or streaming services to your DIRECTV account

Get entertainment your way with DIRECTV

Streaming devices compatible with DIRECTV

Get help with your Gemini device

Lease DIRECTV via Internet (no Satellite) Equipment

Chat with an expert

Look for the ‘Chat available’ button at the bottom of the page to resolve your concern now.

Didn't find what you needed? We are here to help!

Connect with other DIRECTV users and experts, ask questions, and find answers.

Didn’t find what you’re looking for? Let us help you!

to perform full service check on your account

Upcoming Appointment

Connect with other DIRECTV STREAM users and experts, ask questions, and find answers.

Have concerns about your service? We can help!

DIRECTV STREAM Support & Customer Service

DIRECTV Support & Customer Service


<p><br>The Genie remote uses light to send the signal to the receiver. If anything is blocking the receiver, this can affect the functionality of the remote. We recommend having the receiver placed in an area that is free and clear of obstructions.</p>
<h3><br>Batteries and Receiver Input Setting</h3>
<p>To test battery strength, press and hold any button on your remote. If you see:</p>
<ul><li>A solid green light - the batteries are strong.</li><li>A fast-blinking green light - the batteries are okay but may need to be replaced soon.</li><li>A slow, blinking green light or no light - your remote needs new batteries. Remove the battery cover and insert two new AA batteries.</li></ul>
<p><br>Check that the remote is set to control your DIRECTV receiver.</p>
<ol><li>Press and hold the ENTER button for three seconds.</li><li>A Source menu appears to change your TV’s input.</li><li>Select the DIRECTV receiver’s input source. For example, HDMI 1: Satellite Receiver, may be the name of the input. Try different inputs to find the one set up for your TV.</li></ol>
<h3><br>Pair Genie remote with your receiver</h3>
<p>Is nothing happening when you press GUIDE? Make sure your remote is paired with your receiver.</p>
<ol><li>Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.</li><li>Press and hold MUTE and ENTER at the same time on your remote.</li><li>The screen displays Applying IR/RF Setup. The remote is synced.</li></ol>
<p>If that didn’t fix the issue, continue to the next section.</p>
<br><h3>Reset receiver and Genie remote control</h3>
<p>If the buttons on your remote are not responding, try resetting the receiver and remote control.<br><br><strong>Reset a receiver</strong></p>
<ol><li>On most DIRECTV receivers, there is a red button on the side of the receiver or inside the access card door.</li><li>Press and hold the red button until the receiver restarts.</li></ol>
<p>Note: Are you unable to locate the red button? Unplug the receiver&#39;s power cord from the electrical outlet. Wait 15 seconds before plugging it back in.</p>
<h3><br>Reset a Genie remote control</h3>
<p>If restarting your receiver didn’t help, try resetting the remote control:</p>
<ol><li>Press MENU on the remote.</li><li>Arrow down to Settings and press SELECT.</li><li>Go to Remote Control and press SELECT.</li><li>Select Pair/Program Remote. Depending on your setup, this may be automatic, or you may have to enter codes into your remote. Use the code lookup tool to find the 5-digit code.</li></ol>
<p><br>If that didn&#39;t help, try resetting the remote to its default factory settings:</p>
<ol><li>Press and hold MUTE and SELECT together until the light flashes three times.</li><li>Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.</li></ol>
<p> </p>
<h3>Troubleshooting</h3>
<p><strong>Self-care Troubleshooting Wizard</strong></p>
<p>Follow the self-service steps below, as appropriate, to correct remote control issues:</p>
<ol><li>From the Home screen, navigate to and select <strong>Settings</strong>.</li><li>Under the Device Management header, select <strong>Remote Control</strong>.</li><li>The Remote Control Setup screen displays with options to pair/program, troubleshoot, or switch to RF/IR mode; <strong>select Troubleshoot Remote</strong>.</li><li>Select the appropriate option to try to repair your remote or you can select Exit to leave troubleshooting:</li></ol>
<p><strong>Low Battery</strong></p>
<ol><li>From the Troubleshoot Remote page, select <strong>Battery: Low</strong>.</li><li>Follow the instructions to change the batteries.</li><li>Choose <strong>Recheck Battery</strong> or <strong>Cancel</strong> to exit.</li></ol>
<p><strong>Reset and Reprogram</strong></p>
<ol><li>From the Troubleshoot Remote page, select <strong>Reset and Reprogram</strong>.
<ul><li>A system test runs to detect low battery issues and remote control settings.</li></ul>
</li><li>Follow the steps provided to take the appropriate action.</li><li>Once the appropriate steps are completed, you are returned to the Troubleshoot Remote page to continue troubleshooting or select <strong>Exit</strong>.</li><li>If the Reprogramming Successful screen displays, you can use the Genie remote with your TV; select <strong>OK</strong>.
<ul><li>If the issue is unresolved, make a different selection to continue troubleshooting.</li></ul>
</li></ol>
<p><strong>Get Additional Help</strong></p>
<ol><li>If you&#39;re still experiencing issues with your remote, you can scan the QR code displayed or access DIRECTV&#39;s website for more options.</li><li>Select <strong>OK</strong> to return to the Troubleshoot Remote page or select <strong>Exit</strong>.</li></ol>
<p> </p>
<h3><strong></strong></h3>
<h3>Additional remote-control help</h3>
<ul><li><a href="https://www.directv.com/support/satellite/article/000069458" target="_blank">Order a new or replacement remote control</a>.</li><li>If you can’t adjust the TV’s volume, try programming your Genie remote control.</li></ul>



<div id="tileTitle">Fix your Genie remote control</div>
<div id="tileDescription">Learn how to fix volume, channel changing, and other remote issues.</div>
<div id="tileGoBackLink">Go back and choose again</div>
<div id="tileGoBackText">Not your remote?</div>
<div id="firststepcontent">
<p><br>The Genie remote uses light to send the signal to the receiver. If anything is blocking the receiver, this can affect the functionality of the remote. We recommend having the receiver placed in an area that is free and clear of obstructions.</p>
<h3><br>Batteries and Receiver Input Setting</h3>
<p>To test battery strength, press and hold any button on your remote. If you see:</p>
<ul><li>A solid green light - the batteries are strong.</li><li>A fast-blinking green light - the batteries are okay but may need to be replaced soon.</li><li>A slow, blinking green light or no light - your remote needs new batteries. Remove the battery cover and insert two new AA batteries.</li></ul>
<p><br>Check that the remote is set to control your DIRECTV receiver.</p>
<ol><li>Press and hold the ENTER button for three seconds.</li><li>A Source menu appears to change your TV’s input.</li><li>Select the DIRECTV receiver’s input source. For example, HDMI 1: Satellite Receiver, may be the name of the input. Try different inputs to find the one set up for your TV.</li></ol>
<h3><br>Pair Genie remote with your receiver</h3>
<p>Is nothing happening when you press GUIDE? Make sure your remote is paired with your receiver.</p>
<ol><li>Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.</li><li>Press and hold MUTE and ENTER at the same time on your remote.</li><li>The screen displays Applying IR/RF Setup. The remote is synced.</li></ol>
<p>If that didn’t fix the issue, continue to the next section.</p>
<br><h3>Reset receiver and Genie remote control</h3>
<p>If the buttons on your remote are not responding, try resetting the receiver and remote control.<br><br><strong>Reset a receiver</strong></p>
<ol><li>On most DIRECTV receivers, there is a red button on the side of the receiver or inside the access card door.</li><li>Press and hold the red button until the receiver restarts.</li></ol>
<p>Note: Are you unable to locate the red button? Unplug the receiver&#39;s power cord from the electrical outlet. Wait 15 seconds before plugging it back in.</p>
<h3><br>Reset a Genie remote control</h3>
<p>If restarting your receiver didn’t help, try resetting the remote control:</p>
<ol><li>Press MENU on the remote.</li><li>Arrow down to Settings and press SELECT.</li><li>Go to Remote Control and press SELECT.</li><li>Select Pair/Program Remote. Depending on your setup, this may be automatic, or you may have to enter codes into your remote. Use the code lookup tool to find the 5-digit code.</li></ol>
<p><br>If that didn&#39;t help, try resetting the remote to its default factory settings:</p>
<ol><li>Press and hold MUTE and SELECT together until the light flashes three times.</li><li>Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.</li></ol>
<p> </p>
<h3>Troubleshooting</h3>
<p><strong>Self-care Troubleshooting Wizard</strong></p>
<p>Follow the self-service steps below, as appropriate, to correct remote control issues:</p>
<ol><li>From the Home screen, navigate to and select <strong>Settings</strong>.</li><li>Under the Device Management header, select <strong>Remote Control</strong>.</li><li>The Remote Control Setup screen displays with options to pair/program, troubleshoot, or switch to RF/IR mode; <strong>select Troubleshoot Remote</strong>.</li><li>Select the appropriate option to try to repair your remote or you can select Exit to leave troubleshooting:</li></ol>
<p><strong>Low Battery</strong></p>
<ol><li>From the Troubleshoot Remote page, select <strong>Battery: Low</strong>.</li><li>Follow the instructions to change the batteries.</li><li>Choose <strong>Recheck Battery</strong> or <strong>Cancel</strong> to exit.</li></ol>
<p><strong>Reset and Reprogram</strong></p>
<ol><li>From the Troubleshoot Remote page, select <strong>Reset and Reprogram</strong>.
<ul><li>A system test runs to detect low battery issues and remote control settings.</li></ul>
</li><li>Follow the steps provided to take the appropriate action.</li><li>Once the appropriate steps are completed, you are returned to the Troubleshoot Remote page to continue troubleshooting or select <strong>Exit</strong>.</li><li>If the Reprogramming Successful screen displays, you can use the Genie remote with your TV; select <strong>OK</strong>.
<ul><li>If the issue is unresolved, make a different selection to continue troubleshooting.</li></ul>
</li></ol>
<p><strong>Get Additional Help</strong></p>
<ol><li>If you&#39;re still experiencing issues with your remote, you can scan the QR code displayed or access DIRECTV&#39;s website for more options.</li><li>Select <strong>OK</strong> to return to the Troubleshoot Remote page or select <strong>Exit</strong>.</li></ol>
<p> </p>
<h3><strong></strong></h3>
<h3>Additional remote-control help</h3>
<ul><li><a href="https://www.directv.com/support/satellite/article/000069458" target="_blank">Order a new or replacement remote control</a>.</li><li>If you can’t adjust the TV’s volume, try programming your Genie remote control.</li></ul>
</div>


Learn how to fix volume, channel changing, and other remote issues.

Fix your Genie remote control


<h3>Remote buttons, batteries, and mode</h3>
<p>Run your fingers across each button to make sure none are stuck in the pressed-down position.</p>
<h3><br>Check batteries</h3>
<p>To test your batteries, press and hold any button on your remote. If you see:</p>
<ul><li>
<p>A solid green light - the batteries are strong.</p>
</li><li>A fast-blinking green light - the batteries are okay but may need to be replaced soon.</li><li>A slow, blinking green light or no light - your remote needs new batteries. Remove the battery cover and insert two new AA batteries.</li></ul>
<h3><br>Change Mode on the remote</h3>
<p>If your remote is not responding, changing channels, or adjusting the volume, make sure you have direct line of sight to the receiver. Next, make sure your remote is set to control your DIRECTV receiver:</p>
<ul><li>
<p>At the top of the remote, slide the mode switch all the way to the left to the DIRECTV symbol.</p>
</li><li>If your remote controls your receiver but doesn’t work on other devices, change the input mode by sliding the mode switch to the input symbol (for example TV, AV1, or AV2).</li></ul>
<p>If <span style="background-color: #ffffff;">none of these options work, you may need to </span><a href="https://www.directv.com/support/article/000080718" target="_blank"><span style="background-color: #ffffff;">program your remote</span></a><span style="background-color: #ffffff;">.</span></p>
<h3><strong></strong></h3>
<h3>Pair your Universal remote using HD receiver</h3>
<ol><li>Go to your HD receiver and press the Menu button on the front panel.</li><li>Select <strong>Settings &gt; Remote control &gt; IR/RF Setup</strong>.</li><li>If currently in RF mode, change to IR.</li><li>Select <strong>Continue</strong>.</li></ol>
<p>The remote uses light to send the signal to the receiver. If anything blocks the receiver, it can affect how well the remote responds.</p>
<ul><li>Clean the remote control&#39;s emitter and the receiver’s sensor with a soft, lint-free cloth. Wipe the top of the remote and use the same type of cloth to wipe the front panel of your receiver.</li><li>Make sure nothing blocks the path between the receiver’s sensor or the remote’s emitter.</li><li>Turn the brightness down on the TV.</li></ul>
<h3>Reset your receiver</h3>
<ul><li>Most DIRECTV receivers have a red button inside the access card door or on the side of the receiver. Press the red button to restart it.</li><li>If you can&#39;t locate the red button, unplug the receiver&#39;s power cord from the electrical outlet. Wait 15 seconds, then plug it back in.</li></ul>
<p>If you’re still having trouble, <a href="https://www.directv.com/support/article/000069458" target="_blank">order a Universal remote control</a>.</p>



<div id="tileTitle">Fix your Universal remote control</div>
<div id="tileDescription">Learn how to fix your Universal remote, receiver, and settings.</div>
<div id="tileGoBackLink">Go back and choose again</div>
<div id="tileGoBackText">Not your remote?</div>
<div id="firststepcontent">
<h3>Remote buttons, batteries, and mode</h3>
<p>Run your fingers across each button to make sure none are stuck in the pressed-down position.</p>
<h3><br>Check batteries</h3>
<p>To test your batteries, press and hold any button on your remote. If you see:</p>
<ul><li>
<p>A solid green light - the batteries are strong.</p>
</li><li>A fast-blinking green light - the batteries are okay but may need to be replaced soon.</li><li>A slow, blinking green light or no light - your remote needs new batteries. Remove the battery cover and insert two new AA batteries.</li></ul>
<h3><br>Change Mode on the remote</h3>
<p>If your remote is not responding, changing channels, or adjusting the volume, make sure you have direct line of sight to the receiver. Next, make sure your remote is set to control your DIRECTV receiver:</p>
<ul><li>
<p>At the top of the remote, slide the mode switch all the way to the left to the DIRECTV symbol.</p>
</li><li>If your remote controls your receiver but doesn’t work on other devices, change the input mode by sliding the mode switch to the input symbol (for example TV, AV1, or AV2).</li></ul>
<p>If <span style="background-color: #ffffff;">none of these options work, you may need to </span><a href="https://www.directv.com/support/article/000080718" target="_blank"><span style="background-color: #ffffff;">program your remote</span></a><span style="background-color: #ffffff;">.</span></p>
<h3><strong></strong></h3>
<h3>Pair your Universal remote using HD receiver</h3>
<ol><li>Go to your HD receiver and press the Menu button on the front panel.</li><li>Select <strong>Settings &gt; Remote control &gt; IR/RF Setup</strong>.</li><li>If currently in RF mode, change to IR.</li><li>Select <strong>Continue</strong>.</li></ol>
<p>The remote uses light to send the signal to the receiver. If anything blocks the receiver, it can affect how well the remote responds.</p>
<ul><li>Clean the remote control&#39;s emitter and the receiver’s sensor with a soft, lint-free cloth. Wipe the top of the remote and use the same type of cloth to wipe the front panel of your receiver.</li><li>Make sure nothing blocks the path between the receiver’s sensor or the remote’s emitter.</li><li>Turn the brightness down on the TV.</li></ul>
<h3>Reset your receiver</h3>
<ul><li>Most DIRECTV receivers have a red button inside the access card door or on the side of the receiver. Press the red button to restart it.</li><li>If you can&#39;t locate the red button, unplug the receiver&#39;s power cord from the electrical outlet. Wait 15 seconds, then plug it back in.</li></ul>
<p>If you’re still having trouble, <a href="https://www.directv.com/support/article/000069458" target="_blank">order a Universal remote control</a>.</p>
</div>


Learn how to fix your Universal remote, receiver, and settings.

Fix your Universal remote control


<p>Many common problems can be fixed by refreshing the connection between your remote and Gemini device. <strong>To refresh the connection, press and hold the home button on your remote.</strong></p>
<p>If this doesn’t work, <strong>unpair your remote</strong> from your Gemini device:</p>
<ol><li>Press and hold the <strong>DASH (–)</strong> and <strong>APPS</strong> buttons until you see the LED lights on the remote blink blue twice.</li><li>Restart your Gemini device by pressing and releasing the red button on the side of the device. You can also unplug your device and then plug it back in.</li></ol>
<p>When your Gemini device is back on, <strong>pair the remote again</strong>:</p>
<ol><li>Point the remote at your Gemini device.</li><li>Press and hold <strong>FAST FORWARD</strong> and <strong>REWIND</strong> at the same time for 2-3 seconds. When paired, you’ll get an on-screen message that your remote is ready to use.</li></ol>
<p><img alt="RW-FF.jpg" src="https://www.directv.com/content/dam/images/support/sf-images/RW-FF.jpg"></p>
<p><strong>Battery check</strong><br>Take your batteries out for a couple of seconds, then put them back in to see if that helps. Or swap them out for a fresh set of batteries.</p>
<p><strong>Heads up!</strong></p>
<ul><li>Pairing can become an issue if batteries are less than 50 percent effective. Bluetooth won’t work all the time.</li><li>The dash button may give the exact battery percentage. Alternatively, you can go to <strong>Menu &gt; settings &gt; this device setting, scroll down active remote, and select give battery percentage</strong>.</li><li>Remote slowly switches to IR mode when the battery is under 25 percent.</li><li>Red light indicates that you need new batteries around 10-15 percent. Exact percentage number may vary based on battery type, voltage, and amp.</li></ul>


<strong>Battery check</strong><br>Take your batteries out for a couple of seconds, then put them back in to see if that helps. You can also try inserting new batteries.<br><br><strong>Remote pairing</strong><br>Heads up! Do you have more than one remote? Each remote control can only be paired to one Gemini (DIRECTV) device at a time and cannot be interchanged without reprogramming. Check that the remote was not accidentally switched.<br><br>Refreshing the connection between your remote and Gemini (DIRECTV) device can fix many common problems. Here’s how:<br><br>First, unpair your remote from the device:
<ol><li>Press and hold <strong>DASH </strong>(–) and <strong>APPS </strong>or <strong>Diamond </strong>buttons until you see the LED lights on the remote blink blue twice.</li><li>Restart your Gemini (DIRECTV) device by pressing and releasing the red button on the side of the device. You can also unplug your device and then plug it back in.</li></ol>
<p>When your Gemini (DIRECTV) device is back on, pair the remote again:</p>
<ol><li>Point the remote at your Gemini (DIRECTV) device.</li><li>Press and hold <strong>FAST FORWARD</strong> and <strong>REWIND</strong> at the same time for 2-3 seconds. When they pair, you’ll get an onscreen message that your remote is ready to use.</li></ol>
<p><img alt="RW-FF.jpg" src="https://www.directv.com/content/dam/images/support/sf-images/RW-FF.jpg"><br><br><strong>Control sound bars and TVs</strong></p>
<ol><li>Program your DIRECTV remote to control them. Here&#39;s how:</li><li>Open DIRECTV on your TV device.</li><li>Choose Settings and then System.</li><li>Select Remote &amp; Devices, then Program Your Remote.</li><li>Choose the TV manufacturer or sound bar you want to add.</li><li>Follow the prompts to finish up.</li></ol>



<div id="tileTitle">Fix your DIRECTV remote control</div>
<div id="tileDescription">Learn how to fix your Gemini remote control.</div>
<div id="tileGoBackLink">Go back and choose again</div>
<div id="tileGoBackText">Not your remote?</div>
<div>Set up your remote control based on the service you use:</div>
<div> </div>
<div id="secondaryRadio1">
<h3 id="secondaryRadioName1"><strong>Satellite dish</strong></h3>
<div id="secondaryRadioContent1">
<p>Many common problems can be fixed by refreshing the connection between your remote and Gemini device. <strong>To refresh the connection, press and hold the home button on your remote.</strong></p>
<p>If this doesn’t work, <strong>unpair your remote</strong> from your Gemini device:</p>
<ol><li>Press and hold the <strong>DASH (–)</strong> and <strong>APPS</strong> buttons until you see the LED lights on the remote blink blue twice.</li><li>Restart your Gemini device by pressing and releasing the red button on the side of the device. You can also unplug your device and then plug it back in.</li></ol>
<p>When your Gemini device is back on, <strong>pair the remote again</strong>:</p>
<ol><li>Point the remote at your Gemini device.</li><li>Press and hold <strong>FAST FORWARD</strong> and <strong>REWIND</strong> at the same time for 2-3 seconds. When paired, you’ll get an on-screen message that your remote is ready to use.</li></ol>
<p><img alt="RW-FF.jpg" src="https://www.directv.com/content/dam/images/support/sf-images/RW-FF.jpg"></p>
<p><strong>Battery check</strong><br>Take your batteries out for a couple of seconds, then put them back in to see if that helps. Or swap them out for a fresh set of batteries.</p>
<p><strong>Heads up!</strong></p>
<ul><li>Pairing can become an issue if batteries are less than 50 percent effective. Bluetooth won’t work all the time.</li><li>The dash button may give the exact battery percentage. Alternatively, you can go to <strong>Menu &gt; settings &gt; this device setting, scroll down active remote, and select give battery percentage</strong>.</li><li>Remote slowly switches to IR mode when the battery is under 25 percent.</li><li>Red light indicates that you need new batteries around 10-15 percent. Exact percentage number may vary based on battery type, voltage, and amp.</li></ul>
</div>
</div>
<div id="secondaryRadio2">
<h3><strong></strong></h3>
<h3 id="secondaryRadioName2"><strong>Internet connection (No satellite) (Gemini and Gemini Air remote)</strong></h3>
<div id="secondaryRadioContent2"><strong>Battery check</strong><br>Take your batteries out for a couple of seconds, then put them back in to see if that helps. You can also try inserting new batteries.<br><br><strong>Remote pairing</strong><br>Heads up! Do you have more than one remote? Each remote control can only be paired to one Gemini (DIRECTV) device at a time and cannot be interchanged without reprogramming. Check that the remote was not accidentally switched.<br><br>Refreshing the connection between your remote and Gemini (DIRECTV) device can fix many common problems. Here’s how:<br><br>First, unpair your remote from the device:
<ol><li>Press and hold <strong>DASH </strong>(–) and <strong>APPS </strong>or <strong>Diamond </strong>buttons until you see the LED lights on the remote blink blue twice.</li><li>Restart your Gemini (DIRECTV) device by pressing and releasing the red button on the side of the device. You can also unplug your device and then plug it back in.</li></ol>
<p>When your Gemini (DIRECTV) device is back on, pair the remote again:</p>
<ol><li>Point the remote at your Gemini (DIRECTV) device.</li><li>Press and hold <strong>FAST FORWARD</strong> and <strong>REWIND</strong> at the same time for 2-3 seconds. When they pair, you’ll get an onscreen message that your remote is ready to use.</li></ol>
<p><img alt="RW-FF.jpg" src="https://www.directv.com/content/dam/images/support/sf-images/RW-FF.jpg"><br><br><strong>Control sound bars and TVs</strong></p>
<ol><li>Program your DIRECTV remote to control them. Here&#39;s how:</li><li>Open DIRECTV on your TV device.</li><li>Choose Settings and then System.</li><li>Select Remote &amp; Devices, then Program Your Remote.</li><li>Choose the TV manufacturer or sound bar you want to add.</li><li>Follow the prompts to finish up.</li></ol>
</div>
</div>


How to fix your DIRECTV remote

Related Articles

Looking for something else?